Common router configuration instructions
Welcome to choose the broadband products of Warner Telecom! All of our staff are dedicated to serve you. If you don't have any customers in wechat group, please contact customer service
Scan the code to add wechat customers
From laptops to mobile devices to smart home appliances that need networking, wireless internet access has become a necessity like electricity and water. Without router, all this can't be realized. Would you like to configure router? This article will introduce you to the most basic router setting methods. Come and have a look!
HUAWEI HG659b
The appearance of hg659b is as follows
The rear interface is as follows: if it is fiber-optic access, plug it into the rear WAN port; if it is VDSL access, plug it into the rear DSL port。
The status indicators are as follows:
Plug in the power light to turn on. When the WAN port is plugged in, the internet light and WLAN light will be on after configuration.
First, connect the router to power, search the WiFi signal of the router with a mobile phone or computer, input the WiFi password of the router (usually written on the back of the router), and click Connect. After connecting to WiFi, open the browser, input the router management address: 192.168.1.254, and enter the interface shown below.
The original firmware of this machine has two groups of management accounts, namely!! Huawei / @ Huawei HW and user / Huawei user. Some router accounts and passwords will be admin / vf-nzhg659 due to different routers
配置ADSL
Click Internet in the upper left corner, select Internet? VDSL (ADSL) in Internet settings, and fill in the parameters.
Enter the user name and password provided by Warner Telecom in internet account and Internet Password respectively, and click save in the lower right corner to finish the configuration.
To configure ADSL:
In the same way as VDSL, click Internet in the upper left corner, then select Internet? VDS, and click Edit to edit. As for the VDSL configuration, please refer to the VDSL configuration method for the specific configuration method. Then enter the account password provided by Warner Telecom in the editing interface and click save.
配置完成。
Configure fiber:
Click Internet in the upper left corner, and then click Internet in settings, as shown below:
The parameters are as follows:
Enter the user name and password provided by Warner Telecom in internet account and Internet Password respectively, and click save in the lower right corner,
Click OK on the pop-up page. Configuration complete