Common router configuration instructions
Welcome to choose the broadband products of Warner Telecom! All of our staff are dedicated to serve you. If you don't have any customers in wechat group, please contact customer service
Scan the code to add wechat customers
From laptops to mobile devices to smart home appliances that need networking, wireless internet access has become a necessity like electricity and water. Without router, all this can't be realized. Would you like to configure router? This article will introduce you to the most basic router setting methods. Come and have a look!
FRITZ! BOX7360
The appearance of router is as shown in the figure
FRITZ! Box is a brand made in Germany, with good quality. It is generally provided to users by 2 degree. There are several different models, and the configuration interface and method are very similar. Now take 7360 as an example to introduce the configuration methods of ADSL, VDSL and optical fiber.
First, connect the router, search the WiFi signal of the router with your mobile phone or computer, input the WiFi password of the router (there are 20 digits on the back of the router that are the password), and click Connect. After connecting to WiFi, open the browser and enter the router management address: http://fritz.box/ as shown below
To configure ADSL:
Click the account information under the Internet in the left column, change the circle to Warner Telecom and check connecting to a DSL line, as shown in the following figure
：
Pull down the page, and fill in the user name and password provided to you in account information
Click change connection settings as shown in the red line to enter the parameter filling interface. Fill in the following figure. Click apply to save after filling in correctly:
To configure VDSL:
The same as the configuration of ADSL, click the account information under the Internet in the left column, change the Internet service provider to our company Warner Telecom and check connecting to a DSL line, and then fill in the user name and password in the account information respectively. In different places, on the change connection settings interface below, fill in the configuration parameters as follows:
Click apply to save after filling in.
Configure fiber:
Click the account information under the Internet in the left column, change the Internet service provider to our company Warner Telecom, check the external modem or router in the connection column, and check the make own connection to the Internet in the operating mode. The following picture:
Report errors
Pull down the page, and fill in the user name and password provided to you in account information
Click change connection settings to enter the parameter filling interface. Fill in the following figure. Click Apply after filling in correctly
